Case Studies

TRADITIONAL REBATES

Customers from SD, MN, IA, WI, OH have successfully received rebates for the following projects:

  1. Replaced all overhead lights in the 90,000+ sq. ft. manufacturing building and received a rebate of $ 13,500
  2. Added a VFD control to a 140AMP motor received a rebate of $ 4,200
  3. Negotiated rate/tariffs that resulted in a total savings of $ 25,000 per year
  4. Identified compressed air leaks and addressed them for a 30,000 sq. ft. facility, resulted in a rebate of $ 2,400

CUSTOM REBATES

Customers from OH, MN, IA, WI, SD have successfully received rebates for the following projects:

  1. Customer replaced old steam heated rubber curing presses (with dedicated hydraulics) with new electrically heated presses with shared hydraulics, resulted in rebate of $ 45,700* (15% of the total capital invested by the customer was recovered)
  2. Customer added a de-barring machine (to de-burr plastic parts) that was more expensive than the alternative that they could have purchased, resulted in a rebate of $ 4,200* (20% of the total capital invested by the customer was recovered)
  3. Customer invested in new tooling / molds that resulted in reduction of machine hours needed to produce the same number of parts, resulted in a rebate of $ 10,500* (20% of the total capital invested by the customer was recovered)

* actual rebate amount will depend on the details of the project

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: